Free Resource

China auto air filter manufacturer

2011-09-01T19:36:00.000-07:00

Tamfiney specializes in manufacturing and marketing air filter,air dryer, fuel filter, oil filter, cabin filter,fuel water separator,hydraulic filter for European, American, Japanese and Korean vehicles, commercial buses and heavy-duty trucks in conformity with national and international standards.Most of our filters are exported to Europe,America and Middle East.

We have production capacity of 500.000 units/monthly and over 1200 kinds of automotive filters, we satisfy its customers all around the world, producing for both the OE and global spare parts markets.

Our firm has been operating under the ISO 9001:2000 quality management standards for years. We also have passed ISO14001 Quality System, experiencing in using environment technology in technology department, together with long time international trading experience.

Each filter tests at every stage in the manufacturing process to the kind of research and development that spawns better. But Tamfiney went one better, going beyond the quality of plants and products to focus on the quality of customer service. Our mission is to be the leader in providing the custom, providing point to point whole position service.At Tamfiney, quality is the way of life and it is synonymous with customer satisfaction.

Contact Information
Address: Xianyan Industrial Zone, Ouhai District, Wenzhou, Zhejiang, China (Mainland)/325000
Contact Person: Ms.Jennifer Cen (sales manager)
E-mail: autoparts2003@gmail.com
Website: http://www.automobile-filter.com

China PTFE Coated Fabric Manufacturer

2011-08-25T23:01:00.000-07:00

Founded in 1995, Jiangsu Zobon Conveyor Belt Co.,Limited is a specialized developer and manufacturer of PTFE & Silicone Coated Fabrics in China. Our product line includes ptfe coated fabrics, ptfe adhesive tape, silicone rubber coated fabrics, ptfe coated mesh fabrics, ptfe conveyor belts. They are widely used in many industrial sectors: food processing, chemicals, mechanics, automobiles, electrical, packaging, textiles, composites, etc.

We possess dozens of advanced vertical and horizontal coating and drying equipment as well as dipping production lines which are imported from Taiwan. We also design and build our own equipment to match the needs of our processes, we are thus able to master the transformation processes effectively and precisely and are up to the satisfaction of the customers. We source raw materials from brand name suppliers, such as PTFE from Daikin in Korea, the silicone adhesive from Dow Corning in the US and K.K in Korea. Our five QC technicians, all with at least five years’ experience, conduct high temperature and aging tests to ensure reliable performance of each item.

Like most Chinese products, competitive prices are one of the main reasons why our clients choose us. Our prices is only half that of our competitors from Korea, Turkey, Brazil or only 1/3 to 1/6 that of the manufacturers from Europe. We understand the need for immediate delivery in critical industrial maintenance applications, We maintains a large inventory of fabric, tape, belt for quick delivery.

We have a 2,200m² factory, where our 50 workers at six automated production lines produce 20,000 square meters monthly for each item. For a less than 1,000 square meter order, we can deliver it in one week. We are seeking exclusive distributor or agency, wholesaler for oversea markets. To take advantage of our cost-effective solutions, contact us today.

Contact Information
E-mail: sales@china-ptfebelt.com
Website: http://www.china-ptfebelt.com/

Brief introduction of Brass Ball Valve

2011-07-12T23:42:00.000-07:00

The working principle of brass ball valve will be same for you to ball valves. However the materials are different. The basketball valves can divide into many kinds according to the elements, such as the brass ball valve, brown ball device, and plastic ball control device and so on. The particular brass ball valve is made up of the particular alloy which contains cooper and zinc. Brass expressed by cooper and zinc oxide named common brass. The particular brass commonly used to generate valve, water line, the hooking up pipe associated with inside and outside devices of air conditioning and radiator and so on.

The function of brass ball valve would be to cut, spread and change the flow way of channel. The baseball valve which often designed a Sixth v type opening up has advantageous function of circulation control.

The options of brass ball valve will be followed. One particular. It is suitable for frequently run because tennis ball valve works and easy to open and close. Two. The hydraulic resistance is usually small. A few. The structure of brass ball valve is simple and it is easy to maintenance. 4. The actual sealing property is excellent.

Below are some standards connected with brass ball valve for you to opt for the qualified just one. The standard variety of cooper made golf ball valve is definitely GB/T 15185-1994; the standard variety of brass ball valve used in publication rack NF/E 29-354-2003; the standard number of quality associated with ball valve quality is actually JC/T8861-2004; the standard quantity of Glass fiber content reinforced revised phenolic brass ball valve is JB/T 8861-2004.

The Structure Of PU Timing Belt

2010-11-03T00:47:00.000-07:00

The PU Timing Belt which is also called Polyurethane Timing Belt, is composed of three parts, that is: back, tension level and belt teeth.

(1) PU timing belt back
Belt back of Polyurethane Timing Belt to the tensile component adhesive coating should have good flexibility and flex fatigue resistance properties, not easy to aging, oil resistance, good wear resistance, there is an appropriate angular size groove in the back of the inner surface of the opening. Besides the requirements of technology, it can also improve teeth’s curved flex fatigue performance while it is running. Meanwhile, PU timing belt back set the tooth air escaping between the closure to eliminate some noise.

(2) wire rope (or polyester cord) tensile layer

Tension level is one of components of PU Timing belt which charges to deliver power and to ensure that the working season from the same belt. Polyurethane Timing Belt uses multi-strand wire rope (or polyester cord) along the tape width of the spiral-shaped manner around the cloth, its position to be the belt section line. Tension level must have high tensile strength tensile strength and resistance to bending fatigue. Large elastic modulus, not allow any extension when it is working to guarantee the fixed pitch of PU timing belt.

(3) Belt teeth of PU Timing Belt
Polyurethane timing belt teeth should have a higher shear strength, good abrasion resistance and oil resistance. Distribution requirement with teeth is very high. Belt teeth should match with the right gear to be meshing with the pulley groove, so it is strict requirements to the accuracy of geometrical parameters belt teeth. PU timing belt is popular with excellent oil resistance, wear resistance.It applies to high-speed operation with small power situation that the environment should be relatively dry and the working temperature is generally range -20 to +80 C.

The Technology of Welded Wire Mesh

2010-11-03T00:31:00.000-07:00

Welded wire mesh is welded by high quality low carbon steel wire, by automation exact spot welding process after the formation of machinery and equipment, then, using dip zinc surface treatment process to deal. Once Welded wire mesh is finished, it’s net surface is smooth and tidy, solid structure uniform, the overall performance is good, even if the local cut-off or pressure will not loose. Welded wire mesh is a product which has strongest anti-corrosion ability among iron welded wire mesh and it is the most versatile type of network used in iron mesh. High-quality corrosion resistance making it widely used in the farming. Besides, it’s smooth and tidy net surface, an increase of perception, can play a decorative role, this feature also makes it somewhat in the performance of the mining industry. Due to adopt low-carbon materials for high-quality raw materials to make it alone iron screen with generally do not have a flexibility to determine its course in the use of plasticity, which can be used in metal processing technology aspects of the deep, complex wall plaster, underground leak-proof anti-cracking. So that the cost much lower than the cost of iron screen, better understand its economic benefits.

Generally, Welded wire mesh can be divided into hot-dipped galvanized welded wire, mesh welded wire mesh, PVC welded wire mesh, PVC welded wire mesh, galvanized welded wire mesh, welding galvanized welded wire mesh and stainless steel.

For example，PVC Welded Wire Mesh’s weaving and characteristics: wire coated after welding, has strong corrosion resistance to oxidation, color, bright, beautiful, corrosion preventive, non-fading, anti-ultraviolet radiation.

PVC welded wire mesh usually used in industry, agriculture, construction, transportation and other sectors of the fence, decoration, machine protection.

Why Stainless Steel Wire Mesh Get Rusty?

2010-09-28T22:51:00.000-07:00

“Stainless steel wire mesh is rusty, stainless steel mesh couldn’t be rusty.” In fact, this is a lack of understanding of the one-sided stainless steel misconceptions. Under a certain condition, stainless steel welded wire mesh will be rusty.

Stainless steel wire mesh rely the surface layer to prevent the oxygen atoms to penetrate which is very thin and strong. Then it forms a stability of dense protective film to prevent from oxidation, and access to anti-corrosion ability. However, this ability is conditional. For some reasons, this film was the constant destruction of air or liquid oxygen will continue to infiltrate or metal from the iron atom out of constant analysis, the formation of porousiron oxide, metal surface corrosion also be kept. This surface film in the form of destruction of many more common in daily life are the following categories:

1. There is other metal elements containing dust particles or heterogeneous metal attachments on Stainless steel wire mesh’s surface. In humid air, condensation between fixtures and stainless steel water will allow the two together into a micro-battery to cause power chemical reaction. Then protective film is damaged, we call it electrochemical corrosion.

2. Stainless steel wire mesh surface adhesion organic juice (such as vegetables, soup, sputum, etc.), in the case of water oxygen to form organic acids, organic acids. Corrosion will happen on the metal surface of stainless steel welded wire mesh in the long time.

3. Stainless steel wire mesh surface adhesion containing acid, alkali, salts (such as wall decoration alkaline, lime water splash), causing localized corrosion.

4. Where air pollution (such as with a large number of copper oxide, aluminum oxide, sulfide, nitrogen oxides, carbon dioxide, iron oxide in the atmosphere), the water molecules condensated to form sulfuric acid, nitric acid, acetic acid, oxalic acid solution point, causing Stainless Steel Wire Mesh chemical corrosion.

Situation described above can all get the surface of stainless steel wire mesh rusty and damage to cause corrosion protective film. Therefore, we should strengthen the protection of the surface of stainless steel wire to lengthen it’s best life.

Article Quote From : equipment info
http://equipmentinfo.posterous.com/why-stainless-steel-wire-mesh-get-rusty

Beware of the Used Cars Owner Bearing Offers!

2009-04-02T20:23:00.000-07:00

Hence, it is equally important to know the basic factors that need to be considered before the buyer decides on a particular used car, especially if the car will be bought directly from the owner.

Here are some tips that might help those who are planning to buy a used car from its owner.
1. When buying cars from the owner, the buyer should ask the seller for the “vehicle registration document” or the so-called V5. Through this document, the buyer will be able to know the full details of the car’s ownership like the name of the owner, the address, and other identity details.
2. If in case the V5 is with the Driver and Vehicle Licensing Agency or the DVLA, as told by the owner, the buyer should verify the reason. If it is due to recording purposes where the change of ownership shall be recorded, the seller should have a green slip that is to be presented to the buyer in exchange of the V5.
3. It is best for the buyer to ask the seller to see the insurance policy for the vehicle. If the seller cannot produce the document, it would be better not to buy the used car because there is a high probability that he is not the real owner or that there is something fraudulent with the transaction.
4. It is important to check if the identification details stipulated in the V5 is the same as that written in the driver’s license. The address and the name should be the same on the two most important documents. Other wise, it would be better not to pursue on buying the car if there is doubt on the details.

These things should never be taken for granted because if any of the conditions mentioned is present, there is a great chance that the car is stolen. Therefore, it’s better not to take any risk.
Tourist attractions Ball Bearings Ball Bearing Deep Groove Ball Bearing

Important Facts on a Mazda Wheel Bearing

2009-04-02T20:22:00.000-07:00

The wheels on one’s Mazda car rotate smoothly, quietly, and with minimal friction due to the fact that they are supported by precision-built ball or roller bearings. In general, the type of bearings used in a number of cars and trucks depends entirely on the specific wheel design, but all have four qualities in common. For one, a high radial loading capacity is a given. That is, the ability to carry both the car and its load without risk of failure. Another is a high thrust load capacity which is necessary as the car turns corners. Quite another is the shock resistance — the kind of shock caused by tires hitting holes in the road, curbs, and other objects. There is also the fact that wheel bearings must have the ability to maintain wheel alignment-this one is an absolute necessity for proper steering and braking action.

These thus make up the many roles that a wheel bearing must see to. That said, one no longer has to give oneself a rub in the head whenever the subject of a wheel bearing springs, especially if it has something to do with one’s Mazda Wheel bearing. Since the wheel bearing is exposed to constant friction, proper cleaning adjustments and lubrication of the said wheel bearing at regular intervals are recommended. This will ensure that the wheel bearings will last as long as the car.

One way to see that this happens is to pay attention. Wheel bearing noises are a major indication that the system is suffering from a number of glitches. It can mean anything from a loose or damaged wheel bearing to an entirely defective bearing model. These flaws can cause a variety of sounds and it is often difficult to find the exact locations where the bearing is faulty. A way to deal with such troubles is to strip the wheel down and wash the wheel bearings. Examine the parts. Rotate slowly and look for wear, flaking, cracks, brinelling, corrosion, or chipping. Such defects are caused by dirt, moisture, improper adjustment, overloading, and in some cases, lack of sufficient lubrication.

On roller bearings, look particularly for chipping on the edges of each roller. While the roller surface may appear to be good, its edges may have become broken from over-tightening. Check both cups and cones, look for defects including actual hairline cracks. Check the color of bearing rubbing surfaces. Those that have been overheated will be blue or blue brown. This indicates that bearing hardness and life expectancy have been reduced and that the bearing should already be replaced. If bearing smoothness is to be tested by pressing the parts together and rotating them, be sure to apply a small amount of light engine oil first to the balls or rollers.When one part of a bearing assembly is unsuitable for further use, the entire assembly should be replaced. Both inner and outer bearings should be replaced at the same time and new races must be pressed into the hub. If the defective bearing only is replaced, it is quite likely that the piece that was left unreplaced will soon fail, requiring one to strip the wheel down again. Replacing both bearings and their races at the same time equalizes the load on them and reduces the possibility of early failure. Not to mention the fact that it saves tremendous time and energy in the process.
Tourist attractions Ball Bearings Ball Bearing Deep Groove Ball Bearing

Powerful Clutch With a Pontiac Release Bearing

2009-04-02T20:16:00.000-07:00

The clutch is an important component that allows the engine power to be applied slowly when your vehicle is starting out and interrupts this power in order to avoid gear crunching when shifting. What happens when you apply the clutch is a transfer of power from the engine to the transmission and drive wheels. This power transfer is stopped when the clutch is disengaged and the engine is allowed to continue turning without force to the drive wheels. There are several components that work together so that the clutch can effectively function such as the clutch disk, flywheel, pressure plate, throw-out bearing or release bearing, and the linkage.

The Pontiac Release Bearing is a ball bearing and collar assembly. Also called a throw-out bearing or a clutch release bearing, like any typical bearing, it reduces the friction between the pressure plate levers and the release fork. It is a sealed unit pack with a lubricant and located between the clutch fork and the pressure plate fingers. From a hub sleeve extending out front of the manual transmission or transaxle it slides out. The release bearing snaps over at the end of the clutch fork and small spring clips hold the bearing onto the fork. The Pontiac Release Bearing then slides along the transmission hub sleeve if there is any fork movement in either direction. The bearing is not designed for continuous use and only operates when the clutch pedal is depressed. When the driver steps on the clutch pedal, the release bearing then applies force to the spinning pressure plate fingers to release the clutch. When the clutch pedal is pressed, a cable or hydraulic piston pushes on the release fork, which presses the release bearing against the middle of the diaphragm spring. And as the middle of the diaphragm spring is pressured in, a series of pins near the outside of the spring causes the spring to pull the pressure plate away from the clutch disc which releases the clutch from the spinning engine. The amount of force the clutch can hold depends on the friction between the clutch plate and the flywheel, and how much force the spring puts on the pressure plate. When the clutch pedal is released the release bearing does not have any contact with the pressure plate fingers and remains still and at rest.

The clutch on a manual transmission usually lasts for several years but then you also have to consider the personal driving habits as well as the usual driving area which can add to the general wear of your clutch. The one dramatic symptom of a clutch problem is poor gas mileage as well as a revving engine sound when you accelerate. Although the release bearing does not require routine maintenance but it should be replaced when there is a need to replace the clutch. A whirring or growling sound when the applying the clutch pedal which also goes away as soon as the pedal is released is one of the symptoms of a worn out Pontiac Release Bearing. When there is insufficient clutch play the release bearing is continuously spinning which causes its premature wear. And if the bearing fails, it may grab and quickly wear the pressure plate fingers.

Tourist attractions Ball Bearings Ball Bearing Deep Groove Ball Bearing

Bearings Repair Company PME Looking for New Machining Facility

2009-02-10T17:08:00.000-08:00

According to filings with the state, PME is considering Maysville along with its current locations as potential sites for the 21,500 square-foot project. The new facility, which would cost about $2 million to startup, is expected to create 20 jobs.PME provides bearing repair services, mainly to the power generation industry, and operates out of Cincinnati, Ohio; Atlanta, Georgia; and Reno, Nevada. The new facility would serve a variety of targeted industry sectors.Kentucky's Economic Development Finance Authority recently gave preliminary approval for a $750,000 tax credit toward the project. It was unclear when a decision would be made. PME officials could not be reached for comment.For more information about the company visit http://www.pmebabbittbearings.com/

Plastic Bearing

2009-01-04T21:55:00.000-08:00

A plastic bearing is a bearing made of plastic. They were in use shortly after plastic was invented. At first they were just solid with a hole through the middle and were more of a bushing than a bearing. Then as technology progressed so did the need for smoother rotating plastic bearings. The plastic bearing as we know it was created.

Plastic bearings are now everywhere from photocopy machines to the tills in the supermarket. Other applications include farm equipment, textile machinery, medical devices, food and packaging machines, car seating, marine equipment and many more.

Solid polymer plain bearings are now increasingly popular due to dry-running lubrication-free behaviour. Polymer plain bearings now provide the step from a simple plastic bushing to the proven and tested, and thereby predictable and quickly available, machine component. Solid polymer plain bearings give low weight and corrosion resistance, as well as the freedom from maintenance and lubrication enable a solution for almost all applications. Managing without lubrication is the dream of every design engineer. With modern materials, polymer plain bearings make this a reality. After research spanning decades, an accurate calculation of the service life of polymer plain bearings is possible today. It is important not to confuse a solid polymer plain bearing with a polymer coated plain bearing, which is a much older technology. Many companies produce bushings which consist of a metal shell which then has a very thin polymer coating (usually PTFE or similar) applied to the inside.

Acrylic display

2008-12-17T18:54:00.000-08:00

Acrylic displays - Acrylic fabrication and plastic fabrication of items such as ballot boxes, brochure holders and more.Acrylic Display And Item:
Acrylic display and acrylic part, such as lip stick display, label, shelf and so on, they could be used in supermarket display, retail display, cosmetic display or any other commercial display. We could produce the quality acrylic part and whole set products based on your design or needs. Our main process is laser cutting, cnc milling, mechanical cutting, forming (heat bend), polishing and so on.. We are the main supplier of acrylic display of lipstick (such as l’oreal, maybelline) in china market as well, and use the good quality acrylic material for all products, which will not change to yellow on the color.

Acrylic Display Cases For Sports MemorabiliaHigh quality acrylic display cases to protect your sports memorabilia. Choose from auto racing or baseball acrylic display cases, basketball acrylic display cases or boxing acrylic display cases, football acrylic display cases, hockey acrylic display cases, and even miscellaneous acrylic display cases for golf and tennis memorabilia.

Acrylic Sheet

2008-12-17T18:37:00.000-08:00

Acrylic Sheet

Known by trade names such as Plexiglas, Acrylite, and Lucite, this material is great for glazing, windows, cutting boards, or anywhere a clear material is needed. Better optical clarity than glass. Light weight. Good impact strength. Clear.

Acrylite Acrylic Sheet is a lightweight substitute for glass that has better optical quality and is more economical. It provides low distortion and will not yellow after prolonged exposure to sunlight. It also offers four times more impact resistance than glass.
Sheet Sizes:
48x96, 49 x 97, 51x100, 60x96, 72x96, 100x100, 100x125, 100x150
Available Colors:
Sheet: White (Opaque & Transparent), Ivory, Gray, Bronze, Black, Red (Opaque &Transparent), Coral, Rust, Orange, Brown, Yellow (Opaque & Transparent), Amber, Fluorescent Yellow, Green (Opaque & Transparent), Fluorescent Green, Blue (Opaque & Transparent), Turquoise, Violet, Lilac. Rod and Tube: Available in Clear only. Colors are available through special order only.

Thinckness: 1.5-30mm
Maximun Width: 2000mm
thickness:1mm-8mmwide range of sizes and colorsFeature: Excellent light transmition, UV protective, smooth and even surface, easy tooling and printing. Competitive price, timely delivery, quality guaranteed.

Fountain Pen Ink

2008-12-16T16:33:00.000-08:00

Fountain Pen Ink
Fountain pen ink is a rather complex medium. A blend of solvents, pigments, dyes and water the characteristics of the ink you use will make quite a difference in your writing experience.

The Controlled Drip
Ink and your fountain pen, well it is really a controlled drip. Gravity and the capillary action of water is what it is all about. Slots allow ink to flow out and air to flow back. That's it. That is how the pen works. Edson Waterman is credited with inventing the the fountain pen with this simple mechanism.

Water and Dyes
Fountain pen ink is basically water with dyes and other chemicals required for proper function. Stay away from Indian or drafting inks unless you want to say good-bye to your favorite pen.
The chemicals creates the properties of of the ink. The appropriate surface tension -- viscosity, the colour saturation -- dyes. As well there are antibacterial additions are included so the ink does not grow new life in the bottle and muck up in inside of your pen!
A good part of the "ink experience" is often summarized as how it flows. It is a "wet ink" bsdrf on its degree of viscosity.
Water has a surface tension of about 73 dynes/cm and fountain pen inks have a surface tension that is lower. Typically between 38 and 45 dynes/cm. From what I have read, if the surface tension value is above 45, then the ink tends not to run through the capillary system of the feed and the pen skips. If the rating gets below 38 then the ink just runs and the flow of ink has less control.
A number of years ago, I had the opportunity to visit the Waterman pen factory in Nantes, France where they make all their inks. At Waterman, a basic ink is used for the base and then dyes are added to create specific colours. Waterman decides on the "blend" of chemicals so that the ink has an appropriate amount of surface tension, flow and drying time assessed as best for their pens. Each manufacturer has their formula. So they say. But some companies use common inks. They just change the bottle.

Are there permanent inks?
Yes there are. But not really because of the ink itself, but because of a chemical reaction of chemicals in the ink to cellulose - one of the properties of paper. These permanent inks use cellulose reactive dyes. As the ink companies say, the dyes are water soluble so there is no effect or damage to the pen. When the ink is in the bottle all is normal. But when the dyes react with cellulose in paper and after the ink dries the ink becomes waterproof and permanent.
I have purchased a number of the permanent inks by Noodler's Ink and tested how they lasted when held under water. Pretty good. Each had a slightly different amount of "run". Oh yes, there is cellulose in those cotton shirts so when you drop these permanent inks on your clothes, well its permanent!
Will inks stain your pen? Some will. Inks in the red, violet and pink colours are more likely to stain the container sectionof the pen. I have a pen that I used Pelikan Purple for many years. Yep, the plastic convertor does have a purple tone to it that is there for life. The blue tone inks are generally the least likely to stain, but then again, if you get some of the highly intense colours that general guide starts to fade.

Inks of Choice
In using many of the inks I find that I am reaching for some bottles more than others. These are the small number of inks that are my Inks of Choice.
But in the end, your ink experience is a combination of: the type of ink used, the nib of the pen (fine to broad nibs lay different amounts of ink on the paper) and the paper itself.

Mixing Your Own Colours
This is a big-time activity. Check our the ink section of Pentrace, a very good source of information on inks, and you will find the formulas for the perfect colour.
A word of caution. Mixing of inks sometime causes problems with a reaction between the various dyes etc. For an example, see the notes under Private Reserve ink. Although those colours are now gone, it helps to remind us on the possibilities of conequences of some inks. Good for them for posting the notice.
When mixing ink, wash the pen, including the converter, with room temperature water. Don't use household cleaners on your pen. A very diluted amononia and water solution has often referenced as an alternative.

Fresh Ink - Old Ink
Can you use old ink? Most will agree you can, provided the ink has not been subject to sunlight, and has been properly capped. Give the bottle a shake and try it. If in any doubt, always have a cheaper pen available for your more daring moments. I use inks that are many years old with no problem.

Constraints and trade-offs

2008-12-10T23:31:00.002-08:00

All parts of a bearing are subject to many design constraints. For example, the inner and outer races are often complex shapes, making them difficult to manufacture. Balls and rollers, though simpler in shape, are small; since they bend sharply where they run on the races, the bearings are prone to fatigue. The loads within a bearing assembly are also affected by the speed of operation: rolling-element bearings may spin over 100,000 rpm, and the principal load in such a bearing may be momentum rather than the applied load. Smaller rolling elements are lighter and thus have less momentum, but smaller elements also bend more sharply where they contact the race, causing them to fail more rapidly from fatigue.

There are also many material issues: a harder material may be more durable against abrasion but more likely to suffer fatigue fracture, so the material varies with the application, and while steel is most common for rolling-element bearings, plastics, glass, and ceramics are all in common use. A small defect (irregularity) in the material is often responsible for bearing failure; one of the biggest improvements in the life of common bearings during the second half of the 1900s was the use of more homogeneous materials, rather than better materials or lubricants (though both were also significant). Lubricant properties vary with temperature and load, so the best lubricant varies with application.

Although bearings tend to wear out with use, designers can make tradeoffs of bearing size and cost versus lifetime. A bearing can last indefinitely — longer than the rest of the machine — if it is kept cool, clean, lubricated, is run within the rated load, and if the bearing materials are sufficiently free of microscopic defects. Note that cooling, lubrication, and sealing are thus important parts of the bearing design.

The needed bearing lifetime also varies with the application. For example, Tedric A. Harris reports in his Rolling Bearing Analysis on an oxygen pump bearing in the U.S. Space Shuttle which could not be adequately isolated from the liquid oxygen being pumped, but all lubricants reacted with the oxygen leading to fires and other failures. The solution was to lubricate the bearing with the oxygen. Although liquid oxygen is a poor lubricant, it was adequate, since the service life of the pump was just a few hours.

The operating environment and service needs are also important design considerations. Some bearing assemblies require routine addition of lubricants, while others are factory sealed, requiring no further maintenance for the life of the mechanical assembly. Although seals are appealing, they increase friction, and a permanently-sealed bearing may have the lubricant contaminated by hard particles, such as steel chips from the race or bearing, sand, or grit that got past the seal. Contamination in the lubricant is abrasive and greatly reduces the operating life of the bearing assembly. Another major cause of bearing failure is the presence of water in the lubrication oil. Online water in oil monitors have been introduced in recent years to monitor the effects of both particles and the presence of water in oil and their combined effect.

Bearing failure

2008-12-10T23:31:00.001-08:00

Rolling-element bearings often work well in non-ideal conditions, but sometimes minor problems cause bearings to fail quickly and mysteriously. For example, with a stationary (non-rotating) load, small vibrations can gradually press out the lubricant between the races and rollers or balls (false brinelling). Without lubricant the bearing fails, even though it is not rotating and thus is apparently not being used. For these sorts of reasons, much of bearing design is about failure analysis.

There are three usual limits to the lifetime or load capacity of a bearing: abrasion, fatigue and pressure-induced welding. Abrasion is when the surface is eroded by hard contaminants scraping at the bearing materials. Fatigue is when a material breaks after it is repeatedly loaded and released. Where the ball or roller touches the race there is always some deformation, and hence a risk of fatigue. Smaller balls or rollers deform more sharply, and so tend to fatigue faster. Pressure-induced welding is when two metal pieces are pressed together at very high pressure and they become one. Although balls, rollers and races may look smooth, they are microscopically rough. Thus, there are high-pressure spots which push away the bearing lubricant. Sometimes, the resulting metal-to-metal contact welds a microscopic part of the ball or roller to the race. As the bearing continues to rotate, the weld is then torn apart, but it may leave race welded to bearing or bearing welded to race.

Although there are many other apparent causes of bearing failure, most can be reduced to these three. For example, a bearing which is run dry of lubricant fails not because it is “without lubricant”, but because lack of lubrication leads to fatigue and welding, and the resulting wear debris can cause abrasion. Similar events occur in false brinelling damage. In high speed applications, the oil flow also reduces the bearing metal temperature by convection. The oil becomes the heat sink for the friction losses generated by the bearing.

Casting Bearing

2008-12-10T23:26:00.000-08:00

Continuous casting steel bearings are bearing a. Often used in the application of iron and steel machinery, is a more common bearings. Japan imported brands bearing Seiko has developed a automatically aligning the import of tapered roller bearings. Mainly used in steel casting equipment-driven roller (Guide Roll). The finite element method for strength design, the use of continuous casting and completion of the development of the simulator. Durable life of ordinary auto-aligning tapered roller bearings imports (in the direction of the roll using a fixed-side), 3~4 times.

also can reduce maintenance costs, equipment, iron and steel casting difficult to form a film, a major negative, low-speed, high-temperature, high humidity, casting debris generated when the working environment is extremely bad. In this state, as can easily lead to significant negative orientation of serious roll bending deformation. In order to solve the problem, out of gear set up outside the ring as a sphere, Block-aligning device so that it is not easy curved. To this end SKF, TIMKEN, NSK, and other import brands are more appropriate to develop higher and more high-precision bearings.

pillow block bearing

2008-11-25T18:27:00.000-08:00

A pillow block bearing (plummer block) is a mounted bearing used to provide support for a rotating shaft with the mounting surface on a parallel line with the axis of the shaft.
The bearing housing mounts to a surface parallel to the shaft axis. Selection of the appropriate bearings can be accomplished based on the shaft size and the radial and thrust load requirements. Pillow block bearings are designed to support a shaft: the mounting surface is on a parallel line with the axis of the shaft. Elongated bolt holes in the base or feet of the unit allow for some adjustment and easy mounting of the pillow block bearing.
Certain dimensions and measurements of pillow block bearings are critical to selecting the right pillow block—whether original to the equipment or as a replacement. The shaft diameter is matched with the appropriate corresponding bore dimensions of the bearing unit. If a properly sized unit matching the shaft is selected, the bearing will easily slide onto the shaft and into position, ready to be secured by the locking device. Shaft height also known as backing height is determined by measuring the distance from the base (or bottom) of the pillow block to the center of the inner ring or shaft. Lastly, the distance between the bolt hole centers is taken from the center of one elongated bolt hole to the center of the housing’s other bolt hole.
Housing material for a pillow block bearing is typically made of cast iron or pressed steel. Pillow block bearings are extensively used in conveyor systems such as tube chain conveyors. Most pillow block bearings are self-lubricating.

Ball screw

2008-11-25T18:21:00.000-08:00

A ball screw is a mechanical device for translating rotational motion to linear motion. A threaded shaft provides a spiral raceway for ball bearings which act as a precision screw. As well as being able to apply or withstand high thrust loads they can do so with minimum internal friction. They are made to close tolerances and are therefore suitable for use in situations in which high precision is necessary. The ball assembly acts as the nut while the threaded shaft is the screw.
These items, in contrast to conventional leadscrews, tend to be rather bulky, due to the need to have a mechanism to re-circulate the balls.
To maintain their inherent accuracy and ensure long life, great care is needed to avoid contamination with dirt and abrasive particles. This may be achieved by using rubber or leather bellows to completely or partially enclose the working surfaces. Another solution is to use a positive pressure of filtered air when they are used in a semi-sealed or open enclosure.
While reducing friction, ball screws can operate with some preload, effectively eliminating backlash (slop) between input (rotation) and output (linear motion). This feature is essential when they are used in computer-controlled motion-control systems, e.g. CNC machine tools and high precision motion applications (eg wire bonding).
Due to their low internal friction, ball screws can be back-driven (depending upon their lead angle). They are usually undesirable for hand-fed machine tools, as the stiffness of a servo motor is required to keep the cutter from grabbing the work and self feeding, that is, where the cutter and workpiece exceed the optimum feedrate and effectively jam or crash together, ruining the cutter and workpiece. Cost is also a major factor as Acme screws are cheaper to manufacture.
Low friction in ball screws yields high mechanical efficiency compared to alternatives. A typical ball screw may be 90 percent efficient, versus 50 percent efficiency of an Acme lead screw of equal size. The higher cost of ball screws may thus be offset by lower power requirements for the same net performance.
Ball screw shafts may be fabricated by rolling, yielding a less precise, but inexpensive and mechanically efficient product. Rolled ball screws have a positional precision of several thousandths of an inch per foot. High-precision types are ground, and are typically precise to one thousandth of an inch per foot or better.

Needle Roller Bearing

2008-11-25T18:19:00.000-08:00

A needle roller bearing is a bearing which uses small cylindrical rollers. They are used to reduce friction of a rotating surface.
Needle bearing have a large surface area that is in contact with the bearing outer surfaces compared to ball bearings. Additionally there is less added clearance (difference between the diameter of the shaft and the diameter of the bearing) so they are much more compact. The typical structure consists of an inner race (or sometimes merely a shaft), a needle cage which orients and contains the needle rollers, the needle rollers themselves, and an outer race.
Radial needle bearings are cylindrical and use rollers parallel to the axis of the shaft. Thrust needle bearings are flat and use a radial pattern of needles. Headsets use a crooked pattern, so they are able to absorb both parallel and thrust power impacts.
Needle bearings are heavily used in engine components such as rocker arm pivots, pumps, compressors, and transmissions. The drive shaft of a rear-wheel drive vehicle typically has at least 8 needle bearings (4 in each U joint) and often more if it is particularly long, or operates on steep slopes.

Self-aligning ball bearings

2008-11-25T18:18:00.000-08:00

Self-aligning ball bearings are constructed with the inner ring and ball assembly contained within an outer ring that has a spherical raceway. This construction allows the bearing to tolerate a small angular misalignment resulting from deflection or improper mounting.
1. The self-aligning ball bearing has two rows of balls and a common concave sphered raceway in the outer ring. The bearing is consequently self-aligning and insensitive to angular misalignments of the shaft relative to the housing. It is particularly suitable for applications where considerable shaft deflections or misalignment are to be expected. Additionally, the self-aligning ball bearing has the lowest friction of all rolling bearings, which enables it to run cooler even at high speeds.
2. Features:With two structures of bore cylindrical or tapered and retainers made of steel sheet or synthetic resins, the bearings are characteristic of their spherically formed outer ring raceways allowing for misalignment within 3 degree deflection between inner ring and outer ring, so as to compensate concentricity and deflection errors.
3. Applications:Widely used in machinery of mining, power, and textile etc.

Tapered Roller Bearing History , Applications

2008-11-23T23:38:00.001-08:00

History
In 1898, Timken was awarded a patent for the tapered roller bearing. At the time, Timken was a carriage-maker in St. Louis and held three patents for carriage springs. However, it was his patent for tapered roller bearings that allowed his company to become successful.
Tapered roller bearings were a breakthrough at the end of the 19th century because bearings used in wheel axles had not changed much since ancient times. They relied on bearings enclosed in a case that held lubricants. These were called “friction bearings” and depended on lubricants to function. Without proper lubrication, these bearings would fail due to excessive heat caused by friction. Timken was able to significantly reduce the friction on his bearings by using a “cup” and “cone” design incorporating tapered bearings which actually rolled, which reduced the load placed on the bearings by distributing the weight and load evenly across the cups, cones, and bearings.
Applications

In many applications tapered roller bearings are used in back-to-back pairs so that axial forces can be supported equally in either direction.
Pairs of tapered roller bearings are used in car and vehicle wheel bearings where they must cope simultaneously with large vertical (radial) and horizontal (axial) forces.

Tapered Roller Bearing

2008-11-23T23:37:00.001-08:00

Tapered roller bearings are bearings that can take large axial forces (i.e. they are good thrust bearings) as well as being able to sustain large radial forces.
DescriptionThe inner and outer ring raceways are segments of cones and the rollers are also made with a taper so that the conical surfaces of the raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing.
This conical geometry is used as it gives a larger contact patch, which permits greater loads to be carried than with spherical (ball) bearings, while the geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs. This avoids rapid wear and greatly reduces rolling friction.
The rollers are guided by a flange on the inner ring. This stops the rollers from sliding out at high speed due to their momentum.
The larger the half angles of these cones the larger the axial force that the bearing can sustain.
Tapered roller bearings are separable and have the following components: outer ring, inner ring, and roller assembly (containing the rollers and a cage). The non-separable inner ring and roller assembly is called the “cone”, and the outer ring is called the “cup”. Internal clearance is established during mounting by the axial position of the cone relative to the cup

Rolling-element bearing

2008-11-23T23:33:00.001-08:00

A rolling-element bearing is a bearing which carries a load by placing round elements between the two pieces. The relative motion of the pieces causes the round elements to roll with very little rolling resistance and with little sliding.
One of the earliest and best-known rolling-element bearings are sets of logs laid on the ground with a large stone block on top. As the stone is pulled, the logs roll along the ground with little sliding friction. As each log comes out the back, it is moved to the front where the block then rolls on to it. You can imitate such a bearing by placing several pens or pencils on a table and placing your hand on top of them. See “bearings” for more on the historical development of bearings.
A rolling-element rotary bearing uses a shaft in a much larger hole, and cylinders called “rollers” tightly fill the space between the shaft and hole. As the shaft turns, each roller acts as the logs in the above example. However, since the bearing is round, the rollers never fall out from under the load.
Rolling-element bearings have the advantage of a good tradeoff between cost, size, weight, carrying capacity, durability, accuracy, friction, and so on. Other bearing designs are often better on one specific attribute, but worse in most other attributes, although fluid bearings can sometimes simultaneously outperform on carrying capacity, durability, accuracy, friction, rotation rate and sometimes cost. Only plain bearings have as wide use as rolling-element bearings.

categories of ceramic bearings

2008-11-16T21:42:00.000-08:00

(1)deep groove ball bearings (for the technical level: P4, P5, P6, P0) Deep groove ball bearings, the most representative of the rolling bearing, a wide range of uses, affordable two-way axial and radial load capacity. Suitable for high-speed rotation and low noise, low-vibration forum steel bearings or not the application of heat, cold, corrosion, magnetic field, non-insulated, and other fields.
(2) the aligning ball bearingThe outer ring raceway of the aligning ball bearing is spherical, auto-aligning, can add the error caused by the different heart of axis and shaft deflection. It is used to have a shell with the axis of the heart or the axis of different parts of deflection and high-temperature, low cold, corrosive, non-magnetic fields, such as insulation requirements of aligning the site. Note: no more than 3 degrees inclination.
(3) single row angular contact ball bearings (for the technical level: P4, P5, P6, P0) The angular contact bearing is applicable to high-speed and high precision rotating. In high- temperature, magnetic field, and the water, its accuracy won’t be affected, and it can bear the load synthesis. Standards for the contact angle is of 15 °, 30 ° and 40 °, the greater the contact angle of the axial load capacity of the bigger, the smaller the contact angle of bearing affordable one-way axial and radial load capacity. Generally it is installed in pairs to take.

Blow Molding Machine Manufacturer & Supplier

2008-11-12T20:43:00.000-08:00

Ambition Enterprise Co., Ltd is a plastic machinery and mould exporter and supplier from China. The factory got ISO9001 quality management system certificate. We provide all-around solution for plastic industry. Now we are supplying the following Plastic machinery and moulds.

Machineries:
Automatic blow molding machine, fully-automatic stretch blow molding machine and semi-automatic blow molding machine, Plastic injection molding machine, Plastic pipe extrusion line, plastic pelletizing line, compounding extrusion line, labeling machine & leak detector and other plastic auxiliary machines, etc.

Molds:
Plastic automotive mold, plastic pipefitting mold, plastic PET preform mold, plastic cap mold, plastic crate mold, plastic chair mold, plastic pellet mold, plastic bucket mold, plastic jerrican blow mold, plastic bottle blow mold, plastic IBC drum blow mold, plastic tool box blow mold, etc.

Website: http://www.plastic-machinery-manufacturer.com/

SKF bearings

2008-11-11T23:40:00.000-08:00

SKF bearings SKF bearings SKF USA SKF Bearing Service SKF Bearing Servicesneedle bearings bearing housings tapered bearings tapered roller bearings metric bearings ball bearings cylindrical bearings cylindrical roller bearings pillow block bearings mounted bearings mounted roller bearings flange bearings super precision bearings precision bearings spindle bearings duplex bearings duplex spindle bearings spherical bearings spherical roller bearing, spherical roller bearings thrust bearing, thrust bearings angular contact bearing, angular contact bearings mounted ball bearing mounted ball bearings, roller bearing roller bearings SKF ball bearings SKF Bearing Company tapers taper bearings tapered bearing taper roller bearings idller bearings tapered roller bearings cones cups tapered sets metric sets metric tapered sets precision tapered assemblies tapered assemblies thrust bearings roller bearings roller thrust bearing thrust roller bearing precision bearings
SKF bearings provide the highest quality bearings with the longest possible service life. At Bearing Kinetics we sell most SKF bearings, including all the basic types of bearings like ball, cylindrical, tapered, spherical, plain and mounted. Sizes range from 1/2-inch OD ball bearings weighing less than an ounce to 76-inch OD slewing rings weighing more than 6 tons. Grades vary from ABEC 1, a relatively wide-tolerance industrial grade to ABEC 7 and 9 super-precision machine tool grade.

Deep Groove Ball Bearing

2008-11-10T19:32:00.001-08:00

Deep Groove Ball Bearing is the most frequently roll bearing.Its configuration is simple, and it is used expediently.It is mainly used to support radial load.But when the bearing radial windage is increscent,it has stated capabilities of Angular Contact Bearing,which can support joint load coming from both radial and shaft.And when the rotate speed is high and it is not suitable to use Thrust Ball Bearing,the Deep ball bearing is often used to support pure shaft load.Compared with other type bearing in the same size,thus bearing has small friction coefficient but high high-point rotate speed.Yet,it is not able to bear concussion,and that is incongruous to support over loading.
When the Deep ball bearing has been fixed on the shaft,it can restrict shaft displacement between the shaft and crust,in order to act as shaft orientation between the two direction.Further thus bearing take on stated adjustment center ability,videlicet the bearing is gradient about 2′～10′relative to the crust hole,it also can work normally,which influences the bearing life-span.Deep ball bearing holding frame is most armor plate pressing wave holding frame,but large bearing often adopts metal entity holding frame.Deep ball bearing is diffusely used on automobile,tractor,machine tool,electric machine,water pump,agriculture machine and weave machine etcs.
1) Model: Open, Z, ZZ, RZ,2RZ,RS, 2RS
2) Quality level: reach the same level as the Japanese and European bearings
3) Tolerance level: ABEC-1 (P0), ABEC-3 (P6),ABEC-5(P5)
4) Noise Level: EMQ V1 Z2, EMQ V2 Z3, EMQ V3 Z4, EMQ V4
5) Application: home appliances,low noise and high speed electric motors; automotive components, pumps, machinery.
Deep Groove Ball Bearings include Single Row Deep Groove Ball Bearing, Double Row Deep Groove Ball Bearing, Sielded Deep Groove Ball Bearing, Sealed Deep Groove Ball Bearing, One Direction Deep Groove Ball Bearing, Open Type Deep Groove Ball Bearing.

Linear Motion Bearing

2008-11-10T17:23:00.001-08:00

A linear motion bearing or slide is a bearing designed to provide free motion in one dimension. There are many different types of linear motion bearings and this family of products is generally broken down into two sub-categories: rolling-element and plane.

Thrust Bearing, Thrust Ball Bearing

2008-11-09T20:54:00.000-08:00

A thrust bearing is a particular type of rotary bearing. Like other rotary bearings they permit rotation between parts, but they are designed to support a high axial load while doing this.
Thrust bearings come in several varieties.
Ball thrust bearings, composed of ball bearings supported in a ring, can be used in low thrust applications where there is little radial load. Tapered roller bearings consist of small tapered rollers arranged so that their axes all converge at a point on the axis of the bearing. The length of the roller and the diameter of the wide and the narrow ends need to be carefully calculated to provide the correct taper so that each end of the roller rolls smoothly on the bearing face without skidding. These are the type most commonly used in automotive applications (to support the wheels of a motor car for example), where they are used in pairs to accommodate axial thrust in either direction, as well as radial loads. They can support rather larger thrust loads than the ball type due to the larger contact area, but are more expensive to manufacture. Fluid bearings where the axial thrust is supported on a thin layer of pressurized liquid - these give incredibly low drag. They are commonly used in automotive, marine, and aerospace applications.
Thrust bearings are used in cars because the forward gears in modern car gearboxes use helical gears which, while aiding in smoothness and noise reduction, cause axial forces that need to be dealt with. André Citroën invented a double helical gear which neutralized the thrust caused by normal helical gears.
One specific thrust bearing in an automobile is the clutch 'throw out' bearing, sometimes called the clutch release bearing.
Fluid-film thrust bearings were invented by Australian engineer George Michell (pronounced Mitchell) who patented his invention in 1905. Michell bearings contain a number of sector-shaped pads, arranged in a circle around the shaft, and which are free to pivot. These create wedge-shaped regions of oil inside the bearing between the pads and a rotating disk, which support the applied thrust and eliminate metal-on-metal contact.
The small size (one-tenth the size of old bearing designs), low friction and long life of Michell's invention made possible the development of larger propellers and engines in ships. They were used extensively in ships built during World War I, and have become the standard bearing used on turbine shafts in ships and power plants worldwide.

Ball Bearing History

2008-11-09T17:09:00.000-08:00

Leonardo da Vinci has been credited with the discovery of the principle behind the mechanics of ball bearings.
The first patent was awarded to Jules Suriray, a Parisian bicycle mechanic, on 3rd August 1869. The bearings were then fitted to the winning bicycle ridden
by James Moore in the world's first bicycle road race, Paris-Rouen, in November 1869.
The modern, self-aligning design of ball bearing is attributed to Sven Wingquist of the SKF ball-bearing manufacturer in 1907.
Ball bearings were found on the Roman Nemi ships constructed in about 40 A.D.

Ball bearing

2008-11-06T18:22:00.000-08:00

A ball bearing is an engineering term referring to a type of rolling-element bearing which uses balls to maintain the separation between the moving parts of the bearing.
The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. It achieves this by using at least two races to contain the balls and transmit the loads through the balls. Usually one of the races is held fixed. As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were rotating on each other.
Ball bearings tend to have lower load capacity for their size than other kinds of rolling-element bearings due to the smaller contact area between the balls and races. However, they can tolerate some misalignment of the inner and outer races.
Compared to other bearing types, the ball bearing is the least expensive, primarily because of the low cost of producing the balls used in the bearing.

Plastic Granulator Manufacturer & Supplier

2008-11-06T16:58:00.000-08:00

Rihong Machinery Manufacturing Co., Ltd. is specialized in the production of matching plastic auxiliary equipments. We create the value concept for our customers to meet their needs, and with our personalized thinking, we make unremitting efforts in the research and development of equipments. We provide high-quality series of complementary sets of equipments, such as hopper dryers, vacuum auto-feeding machines, plastic color-mixing machines, powerful granulator, dehumidifier, mold automatic temperature-control machines, cooling-water machines and the central feeding system, for the plastics' processing in various business including electronics, household appliances, CDs, building materials, packaging, beverage, medical industry.

Our products : Plastic Granulator , Industrial Chiller
Website: http://www.plastic-auxiliary-equipment.com/

WTOO Bearing Co.,Ltd.

2008-11-05T17:50:00.000-08:00

WTOO Industrial Co., Ltd. is dedicated ourselves to high-precision mini-sized deep groove ball Bearings and automotive Bearings. Our products are widely used in the high speed electric motors in automobiles, vacuum cleaners, air conditioners and massagers etc.
The registered brand "WTOO" has become the well-known brand of China. Especially the 608 bearing for motor of vacuum cleaner, its rotate speed exceeds 50,000RPM.More than 1/3 vacuum cleaners in the world are running WTOO bearings. WTOO low noise bearings of 608 series have come into numerous households along with air conditioners.

We are a integrated corporation. It was established on March 2000, with Ningbo WTOO import & export Co., Ltd, Ningbo Da'er Bearing Co., Ltd and Ningbo Ningwei bearing Co.,Ltd as it's sub-companies.

website: http://www.wtoobearing.com

We obtained ISO-9001 and TS16949 certificate.

BREEZE MACHINERY INDUSTRY CORP., LTD.

2008-11-04T18:29:00.001-08:00

BREEZE MACHINERY(PARTS) INDUSTRY CORP., LTD. act as the leading company of manufacturing and marketing Chinese bearings. Our vision to be an engineering and marketing oriented supplier of bearings and power transmission parts, to provide our customer with the quality products at the lowest possible price, your managed outsourcing.
With many years' experience we have cooperated with several factories and holding the concerned production company. We supply high quality ball bearing, roller bearing, wheel bearing, thrust bearing, needle bearing, mounted unit bearing, linear motion bearing, also customized bearing per drawing ... We have the advanced equipment, abundant R&D, technical resource, scientific management, strict process control and QC system. Most of our factories approved by ISO9001, ISO9002, QS9000, the automotive bearing factory verified by TS16949, VDA6.1
website: http://www.bearing-fastener.com

NEW CENTURY BEARING CO.,LTD

2008-11-04T18:18:00.000-08:00

NEW CENTURY BEARING CO.,LTD is one of the leading bearing manufacturers in China, which was established in 1987. The company is specialized in producing Deep Groove Ball Bearing, Stainless Steel Ball Bearing, Non-standard Bearing and all kinds of bearing components (including: bearing ring, shield, seal and cage). It's products are widely used in Electric Motors, Fishing Tackles, Various Household Appliances, Automobile, Power Tools, Mechanical Devices. Especially our leading products: the 608 bearing for motor of Air Conditioners and the stainless steel ball bearing for Fishing Tackles, both of which enjoy very high reputation in relative industry field.

After 20 years development, our company has fixed assets RMB 50 million, annual output exceed 60 million pieces bearing, the area of the company covers 40000 square meters and 22000 square meters of building area, with more than 1000 employees in the company. Our products are well sold in The United States, Japan, Korea, Europe and so on.

website: http://www.sxabearing-manufacturers.com

Deep Groove Ball Bearing Catalog

2008-11-02T17:53:00.000-08:00

Deep Groove Ball Bearings include Single Row Deep Groove Ball Bearing, Double Row Deep Groove Ball Bearing, Sielded Deep Groove Ball Bearing, Sealed Deep Groove Ball Bearing, One Direction Deep Groove Ball Bearing, Open Type Deep Groove Ball Bearing.

1) Model: Open, Z, ZZ, RZ,2RZ,RS, 2RS
2) Quality level: reach the same level as the Japanese and European bearings
3) Tolerance level: ABEC-1 (P0), ABEC-3 (P6),ABEC-5(P5)
4) Noise Level: EMQ V1 Z2, EMQ V2 Z3, EMQ V3 Z4, EMQ V4
5) Application: home appliances,low noise and high speed electric motors; automotive components, pumps, machinery.

Deep Groove Ball Bearing

2008-11-02T17:50:00.000-08:00

Ball Bearing Features

2008-11-02T17:48:00.000-08:00

Features :
Shield / closure: open ball bearing, Z, ZZ, RS, 2RS,2RZ
Ball bearings snap ring: N, NR Tolerance codes: ABEC-1, ABEC-3, ABEC-5
Vibration level codes: V4, V3, V2, V1
Internal clearance codes: C2, C3, C4, C5
Ball bearings material: GCr15, SAE52100(USA), DIN100Cr6(Germany), BS535A99(UK)
Cage: SPCC, nylon66
Hardness for rings and balls: 60- - 65HRC
Lubrication: Oil, Grease